End to End Solution

Your System Partner 
For integrated Flash
& Test Solutions

Learn more

XDM-Series 

End-of-Line High Speed
Download Modules – Maximum efficiency
with ProMik Production Bootloader 

ProMik new XDM Series stands for maximum performance for big data programming, ideally suited for eMMC, OSPI or UFS devices. While supporting fastest interfaces like Ethernet and USB3, outstanding download speeds of up to 200MB/sec are easily achievable.

Due to its unique capabilities the new XDM Series modules are versatilely applicable for initial flashing via needles or for End-of-Line programming tasks. Along with High Speed programming the modules are capable to perform tests like restbus simulation which makes the bit/procurement of additional hardware unnecessary.

The XDM-ETH additionally allows generic ethernet communication with the DUT. Combined with the corresponding software driver ethernet commands be defined individually. 

Features

  • Xilinx Zynq UltraScale+ SoC running Linux 5.10 operating system
  • 4x Independent Ethernet/USB channel
    • Ethernet throughput with up to 100Mbyte/sec per channel
    • USB3 throughput with up to 300MByte/sec per channel
  • Host Ethernet uplink 1000BASE-T
  • ProMik 19“ Rack compatibility

MSP23XXNet

Leading Edge Programming & Test
Equipment – The most versatile In-System
Programmer

The next evolutionary step of the most flexible programmer on the market.

More configurable I/Os, a powerful hardware architecture and an improved power supply concept extend the number of devices that can be flashed in parallel (compared to previous models). Panel flashing will now be possible with a reduced number of modules while overall increased performance resulting in shorter Flash cycle times.

The MSP2300NET offers maximum flexibility and can be used for needle flashing, EOL flashing, high speed boundary scan and SMART ICT testing making it massive/powerful tool for electronics manufacturing.

learn more about this product

Features

  • Xilinx Zynq UltraScale+ SoC running Linux 5.10 operating system
  • 24 configurable I/Os for mixed target interfaces
  • Automotive Bus Interfaces: 4x CAN FD, 2x Ethernet 100/1000BASE-T1, 2x FlexRay, 2x LIN
  • Host Ethernet uplink 1000BASE-T
  • 4x channel Target Power Supply up to 14V + 4x channel 1.5 - 5.5V
  • ProMik 19“ Rack compatibility
  • Voltage/Current Measurement functionality

Cyber Security

Cyber Security for Electronics
Manufacturing – Your Cyber Security Partner
for integrated Flash & Test Solutions

Together with ProMik you will meet all current and future security requirements. The increasing networking (IoT) and further autonomization of driving makes cars of tomorrow simply vulnerable to malware and hackers. Due to this development, security concepts have to be established on the application as well as during the production process in order to guarantee a secure product. Consequently, compliances with complex customer-specific safety mechanisms in series production become an increasing part of customer requiremen

  • Secure Infrastructure/File Handling
  • On-chip Security Support
  • Application Security

learn more about this product

Features

  • Consulting & Implementation of customer-specific cyber security requirements
  • Secure OEM backend connection
  • Encryption & decryption of the application software (e.g. PGP, AES, RSA & Ellipitic Curve Algorithmen”
  • Support of On-Chip security feature like Secure Boot, Debug Interface Lock & HSM/SHE+ support

SMART ICT

Innovative Merger of Flash & Test –
Based on ProMik Bootloader Technology

It represents the latest technology in embedded testing based on ProMik bootloader technology and offers, in addition to Flash programming, multiple testing capabilities based on standardized hardware and software components. Ensuring lean and efficient processes with one universal hardware to increase the productivity in production.

  • Increased test coverage
  • Faster & stable
  • JTAG/Debug interface independent
  • Parallel

SMART ICT is an inside-out approach to In-Circuit Testing. With a SMART ICT bootloader running on the main MCU of the target PCB, can test that components and modules are correctly placed and functioning, without the need for physical connection via test pads.

learn more about this product

Features

  • High Speed Boundary Scan
    • Stable JTAG frequencies of up to 50MHz due to patented IP
  • Flash Programming
    • Fastest Device Driver on the market
  • Functional Test
    • Perform test functions with the same hardware

Software

Software Manufacturing Solutions –
High Performance Algorithms for
Flashing & Testing of ECUs

With ProMik’s modular software solutions you will meet intuitive operation, highest functionality and traceability. Under one user interface, it combines all necessary software packages for an integrated Flash process. Regardless of experience, engineers can rapidly and cost effectively set up Flash stations in your production.

learn more about this product

Features

  • High Performance Alogrithms
  • MES Connectivity
  • DLL based device driver
  • Continous Software Updates

Fixture

ProMik Fixture – Best Signal Integrity
for highest Yield & Reliablity

The application-specific fixture kits, which are used for contacting with the customer application, are designed with unique ProMik know-how and enable a simple and fast change in production.

Customers get high quality wiring of the programming signal line, signal integrity testing with the customer application and intelligent ICT testing, combined with robust and durable mechanics from ProMik.

learn more about this product

Features

  • Fast design- and manufacturing process
  • Highest signal integrity
  • Complex analysis & measurement (FEA, Strain Gauge)
  • Reliable & quality inspected
  • Customizable (sensors & scanners)

Systems

Semi Automated Production System –
Flash & Test on One Station

Depending on your production concept, ProMik offers you several options. ProMik’s stand-alone SAP2100-Auto system is suitable for all on-board programming and test requirements. This allows you to fully program and test up to 200 targets in parallel. Plug & Play adapter solutions from ProMik complement the total solution and, depending on your production needs, you can also implement the solution in smaller systems from ProMik like the SAP1021.

  • Based on MSP21xxNet technology
  • System control via FlashTask Pro
  • Easy fixture exchange for multiple projects (RFID protected)

 

learn more about this product   read our news article

Features

  • Flash Programming & Test Station
  • Modular concept for upgrade/adaptations
  • Parallel high speed on-board programming on PCB and panel level
  • Based on 19” rack components for easy upgrade
  • Inhouse fixture design and manufacturing for high-speed Flash & test cycles

Promik Values

Three pillars on which we build

We combine our future-oriented way of thinking with the values of
one owner-managed family business.

Quick Links

Südwestpark 100
90449 Nürnberg
Germany

Phone: +49 (0) 911 25 26 65-0

Mail: infopromikcom